Now Booking 2027 Build Slots

Stuart 23

23'
Inshore · Offshore
Stuart 23 logo

Muscular freeboard, Yamaha power up to 350 hp, and a rounded bilge that runs flat in rough seas.

LOA25' 10"
Beam8' 6"
Deadrise17°
Max HP350
The Stuart 23 at a Glance

Designed in 2015 by OCEAN5, a naval architecture firm that draws hulls up to 185 feet. The Stuart 23 is an inshore-to-nearshore center console you can run alone, with a finish built to last.

Built for the angler who fishes alone.
Singlehanded from the helm.
Inshore capable. Offshore rated.
More boat than its 23 feet suggest.
01
The Hull

The rounded bilge.
Why the ride feels different.

Many production boats use a deep V with lifting strakes. The Stuart 23 uses a 17° deadrise and a continuously rounded bilge that keeps more hull in the water, so it runs flatter and slams less in rough water.

A Rounded Bilge Concept

Stays on plane at lower speeds.

Less bow rise on plane means you can slow down in worse seas and still keep a proper running attitude.

B Confidence In Motion

Runs like a much larger boat.

The flatter running attitude rides better than a typical 23-foot deep V. More hull in the water, in a boat you can run alone.

Light blue Stuart 23 running at sunset with an angler at the helm
Running attitude · Stuart 23 with single Yamaha F300
Walk the Boat

Bow to stern,
built around how you fish.

Up to three livewells, up to three insulated fishboxes, leaning post, helm layout, and top config are all yours to set. Here is a walk through of the main stations.

Stuart forward console seat and cockpit seen from the bow
01 The Foredeck
Forward seating, no forward seating, or coffin box, your call.
Build notes

Spec it your way. Roof: no top, Bimini, surfboard hardtop, low-profile second station, or folding tower. Electronics: joystick, autopilot, radar, multiple MFDs. Outriggers from 15' to 22'. Up to three livewells and three insulated fishboxes. Choose forward seating, flush deck, or coffin box. SeaDek or teak flooring optional.

Close up of a Stuart helm with steering wheel and electronics
02 The Helm
Hydraulic steering, SS wheel, C-Zone digital switching with manual backup.
Leaning post with a full rod rack in the Stuart 23 cockpit
03 Rigging
Gunnel-mount rod holders with hidden fasteners. Where you want them, at the angle you want.
Leaning post with backrest and rod holders under the T top
04 The Leaning Post
Aluminum frame, fixed backrest, footrest, integrated rod storage.
Open insulated fish box hatch in a Stuart deck
05 Storage
In-sole compartments. Two 42" × 15" rod storage aft.
Top configuration

A folding tower works for sight fishing. A surfboard hardtop stays low. A low-profile second station lets you stand on the console and steer through the hardtop.

T top with radar dome, antennas and outrigger bases against a blue sky
06 The Top Station
Stand on the console and run the boat through the hardtop.
Power Options

Yamaha only.
Up to 350 hp.

We rig every Stuart 23 with Yamaha power up to 350 hp. We'll help you choose the package for how far you run.

A Single Engine

Single
Yamaha F300

Top Speed49.5MPH
Cruise @ 3,500 rpm
26.5mph
Burn @ Cruise
8.2gph
Range
290mi
0 to 20 mph
5.77sec
Best For
Inshore and nearshore work, weekend runs, the angler who values fuel economy and a lighter transom. Figures from Yamaha Performance Bulletin, single F300XSB, tested June 27, 2023. Range is estimated from 90% of the 100 gallon tank at 3,500 rpm.
B Twin Engine

Twin
Yamaha F150

Total Power300HP
Cruise
Ask us
Burn @ Cruise
Ask us
Range
Ask us
Time to Plane
Ask us
Best For
Offshore runs where you want the redundancy of two engines. Twin Yamaha F150s give you 300 hp total, within the 23's 350 hp maximum. Call us for performance numbers on this package.
Full Specifications

Full
specs.

Stuart 23 specs. Configurations may vary with options and the final build sheet.

01 Dimensions

Length Overall (no engine)23' 3"
Length Overall (with engine)25' 10"
Beam8' 6"
Draft (hull only)14in
Deadrise at Transom17°
Bridge Clearance7' 4"

02 Capacities

Fuel Capacity100gal
Water Capacity20gal
Livewells (max)3
Insulated Fishboxes (max)3
Persons Capacity8
Dry Weight (no engine)3,650lbs

03 Construction

Hull DesignOCEAN5
Hull TypeRounded Bilge
LaminationResin-Infused
CoringCorecell
Wood ContentNone
Wiring StandardABYC / Tinned Cu

04 Power & Systems

Maximum Horsepower350
Engine ConfigurationYamaha power up to 350 hp
Engine BrandYamaha
SteeringHydraulic
Switching SystemC-Zone Digital
Manual BackupYes
Need more data?
View the Yamaha performance reports.
View the Yamaha performance reports
Standard Equipment & Options

What's included.
What you can spec.

Standard equipment is on the left. Common options are on the right. Use them as a starting point for your build.

What every Stuart 23 includes.

Standard
01 Hull & Construction
  • OCEAN5-designed rounded bilge hull
  • Resin-infused, hand-laid lamination
  • Corecell coring throughout
  • No wood content: full composite construction
  • Fully foamed flotation
02 Electrical & Wiring
  • C-Zone digital switching with manual backup
  • Tinned copper wiring, ABYC standards
  • Dual battery system with isolator
  • 12V outlets at helm and stern
  • LED courtesy and navigation lighting
03 Plumbing & Systems
  • Sea chest with redundant pickups
  • Hatch gutters drain overboard, never to bilge
  • Raw-water washdown
  • Fresh water tank (20 gal) and pickup
  • Hydraulic steering
04 Hardware & Finish
  • 316 stainless steel hardware throughout
  • SS steering wheel
  • Two 42" × 15" in-sole rod storage compartments
  • Standard livewell with sea-chest plumbing
  • Aluminum-frame leaning post with backrest and footrest
  • Awlgrip topcoat finish

What you can spec on top.

Options
01 Top Configuration
  • No top (open console)
  • Bimini top
  • Surfboard hardtop
  • Hardtop with low-profile second station
  • Folding tower (sight-fishing platform)
02 Fishing Setup
  • Up to 3 livewells (configurable size and placement)
  • Up to 3 insulated fishboxes
  • Coffin box (forward casting deck)
  • Outriggers: Rupp, Tigress, or Lee, 15' to 22'
  • Tackle center, electric reel outlets, kite rod holders
03 Electronics & Controls
  • Yamaha Helm Master joystick controls
  • Multiple MFD configurations (Garmin, Simrad, Furuno)
  • Open-array radar
  • Autopilot
  • Trolling motor with bow mount
04 Comfort & Finish
  • Forward seating with cushions / no forward seating
  • Marine head with privacy enclosure
  • Fresh water shower (transom or stern)
  • SeaDek or teak flooring
  • Custom hull color and Awlgrip finish

Not seeing what you're after? The options list above is what owners spec most often, but the build is yours from bow to stern. Bring the idea to the conversation.

Pricing
$160,000
A Starting at, single F300, standard build

No surprises.
No dealer markup.

We sell direct from the shop in Stuart, Florida. The starting price reflects a complete, ready-to-fish build with the full standard equipment list, not a stripped boat that needs a dealer to make it whole. Engine packages, options, and custom configurations are spec'd against the starting price; we'll walk through the math together on your first call.

What Affects the Price
  • + PowerEngine package, Yamaha power up to 350 hp, is decided in Phase 2 of the build conversation.
  • + TopHardtop adds modestly; folding tower or low-profile second station are larger investments tied to fabrication and labor.
  • + FishingAdditional livewells and fishboxes, outrigger packages, coffin box, and tackle stations. Each is a discrete line item.
  • + ElectronicsHelm packages (Garmin, Simrad, Furuno), joystick controls, radar, and autopilot are spec'd to your preference and rigged in-house.
  • ExcludesSales tax, registration, freight if outside Florida. We deliver direct or arrange transport, your call.
The Build Process

From your call
to your sea trial.

A Stuart 23 isn't ordered from a catalog. It's built around a conversation. Here's what the next nine to twelve months look like once you decide to move forward.

01 / Start

Conversation

A phone call, not a quote. We talk about how you fish, where you run, and what the boat needs to do for you.

02 / Design

Configuration

Bow to stern, we spec the boat together. Every option (power, top, livewells, electronics, finish) is decided in collaboration.

03 / Build

Construction

Hand-laid in our Stuart, FL shop. Photo updates throughout. Standing invitation to visit and see your boat in build.

04 / Launch

Sea Trial

Final commissioning and a sea trial with the team. You leave knowing your boat better than anyone outside the shop.

05 / Forever

Service, Wherever You Are

Not near the shop? For warranty concerns, we work one on one with your dealer or service center of choice and pay their regular retail shop rate, so your boat gets normal priority.

Typical Timeline9 to 12 Months
Currently Booking2027
Build Slots / YearLimited
WhereStuart, Florida
Stuart 23 Owners
“

Giddy-Happy, those are the words that come to mind at how I feel being the owner of my 23 Stuart. Boating 50 plus years, owning everything from a small Dory to Trawlers. I have experienced every type of bottom, deep V to flats, planning to full displacements. The design and engineering of Stuart Boatworks hull is brilliant! She cuts through the chop effortlessly and is rock solid on the drift.

Robert V.
Stuart 23 Owner · Little River, SC
White Stuart 23 with twin Yamaha outboards on the water with a bridge behind
Stuart 23

23s in the wild. From every coast.

See the owner gallery
Aerial of a white Stuart 27 and teal-hulled Stuart 23 beached on a sandbar
White Stuart 23 with teal hull and single Yamaha at rest beside docks and palms
Head-on bow view of a white Stuart 23 on the water with a coastal bridge behind
Leaning post with backrest and rod holders under the T top
T top with radar dome, antennas and outrigger bases against a blue sky
White Stuart center console with a Yamaha outboard at rest in calm water
27
Looking at the 27 instead?
See the bigger brother.
Pre-Owned

Don't want to wait?Build slots are 9 to 12 months out. We occasionally list pre-owned Stuart 23s from our owner network, fewer hours, faster delivery, same hull design.

Inquire About Available 23s
Build Your 23

Talk to the people
who build the boat.

No dealers. Tell us how you fish and where you run, and we'll take it from there. Most builds start with a phone call.

Portrait of a Stuart Boatworks team member in a cap and sunglasses on the water
Your Direct Contact
Matt George
We respond personally within one business day. Your information stays with our team, no third-party marketing, ever.
Thanks for reaching out. Your message is on its way to the Stuart Boatworks team, and we'll be in touch soon.